 The
Mr. Deblister ™ and Mr. Deblister
Jr™ Product Recovery Systems are high speed
deblister machines that safely separate and remove product,
such as liquid gels, caplets, and tablets from blister cards,
including walletized blister cards.
The machines are designed to be placed next to your thermoforming
machine, so that any rejects can be recovered during the
lot run. Therefore, product in any rejected cards can be
repackaged without having to move the rejected product out
of the packaging area, and before the next lot would reach
the machine.
The system recovers push through, cold form and child resistant
blister cards and has no difficulty with tight product blisters
or stiffening ribs.
The ease of operation requires only 1/2 hour
of training.
 Benefits:
- Quick product recovery
- Rapid return on investment
- Reduction of repetitive strain injury
- Reduced cost of waste disposal
Mr. Deblister™ processes up
4800 cards per hour. Tooling changeover needs only 10 -
15 minutes of your time to be up and running another product.
The change parts include: twelve nest plates, one magazine
and one set each of custom perforation and push out tooling
(varies according to card layout and products).
Mr. Deblister Jr™ processes
up to 3000 cards per hour. Tooling changeover needs only
3 - 5 minutes of your time to be up and running another product.
The change parts include four nest plates, one magazine
and one set each of custom perforation and push out tooling
(varies according to card layout and products).
Both machines are CE compliant.
Comparison Chart
|
| |
Mr. Deblister
™ |
Mr. Deblister
Jr™ |
| Wiring |
110-220 volt
plug-in |
110-220 volt
plug-in |
| Output up to |
4800/hour |
3000/hour |
| Required Floor Space |
24" x 48" |
23" x 28" |
| Variable Speed |
|
|
| Micro Processor Control |
|
|
| 4 line Vacuum Fluorescent Display |
|
|
| Jam sensing and mechanical overload protection |
|
|
| Card Counter and Speed Indicator |
|
|
| Fully automatic and manual modes |
|
|
| Full mobility of entire system |
|
|
| cGMP design allows easy cleaning |
|
|
| Full guarding with safety interlocks |
|
|
| Minimum Card Size* |
30 x 50 mm |
30 x 50 mm |
| Maximum Card Size* |
120 x 145 mm |
120 x 145 mm |
| Can separate multiple products |
|
|
| Can be used as H.U.D. splitter |
|
- |
| Built in the USA and patented |
|
|
*The machines can be customized to handle larger blister
cards.
"If You Need a Machine and Don't Buy It, Then You
Will Find You Have Paid For It, But Don't Have It"
- Henry Ford |
